You don't require a file; simply type the thread's information into the fields using the "Standards" option, and the thread will appear, as long as the thread box in the "Properties/View/Dress-Up/Thread" menu of the drawing view you want them to appear in is checked.
If you want to make a hole in Part Design, click the Hole icon. If you want to make a hole in a Functional Molded Part, click the Hole icon.
Choose the face where you want to make the hole.
Define the hole shape and enter the parameters of your choice in the Hole Definition dialogue box that appears.
You may either double-click on the hole feature to set the size and then place it many times, or you can drag and drop a hole in the 3d area and duplicate it.
Making Dimensions for Threads
In the Dimensioning toolbar, select Thread Dimension ( Dimensions sub-toolbar).
In the front view, select the thread to be dimensioned.
Re-click Thread Dimension.
Select one of the two lines representing the thread to be dimensioned in section view B-B.
Learner's Ratings
4.7
Overall Rating
76%
18%
3%
1%
2%
Reviews
K
KULWANT SINGH
5
sir from where i got this step file
and sir this course is very helpful . sir if you will upload FEA AND CFD course that will also helps lots of peoples
S
Srikanth Reddy Y
5
Thank you
Ashok kumar
5
Sir,
3D experience CATIA V6 Piping course provide
V
Vaibhav Prasad
5
Its dammm too good and detailed with every lecture and exampled
V
Vaibhav Prasad
5
Seriously saying i loved the course , i learned it for free and i have completed up to 70% course and i am now dam good in designing . Thank you soo much
E
Er. Krishna Mandal
5
sir how to start my career in design engineer please sagest
sir.
P
Prathmesh Kashid
5
sir thread are not see after proccess
S
Sadanand Sanjay Bondre
5
one of the best teaching i am preparing for automotive plastic domain its helps me a lot plz cover the ugnx software also
P
Parag Borse
4
Hello sir, how to move shaft inside of hollow part with distance please guide
Share a personalized message with your friends.