Master Solidworks 2022 with Real Time Examples and Projects > Project

Valve

35.6k

Ball, butterfly, diaphragm, gate, pinch, piston, and plug valves are examples of isolation valves. Ball, butterfly, diaphragm, globe, needle, pinch, and plug valves are examples of regulation valves. Pressure relief and vacuum relief valves are two types of safety relief valves. Swing check and lift check valves are examples of non-return valves.

A valve is a mechanism or natural thing that opens, closes, or partially obstructs numerous passages to regulate, direct, or control the flow of a fluid (gases, liquids, fluidized solids, or slurries).

The body, bonnet, trim (internal elements), actuator, and packing are all basic parts of all valves, regardless of type.

The most typical method for sizing a control valve is to determine the flow coefficient, Cv, which is a measure of the valve body and trim capacity. A valve Cv is defined as the number of gallons per minute (GPM) that will travel through a valve with a pressure drop of 1 psi at 60°F (15.5°C).

Valves control fluid flow by controlling a pressure decrease in a pipeline. Valves are a popular final control element in a process control system that keep pressure, temperature, composition, and other process variables constant.

Learner's Ratings

4.6

Overall Rating

  • 75%
  • 17%
  • 3%
  • 1%
  • 4%

Reviews

S
SYED USAMA ALI
5

Helpful

D
Damor kartik
5

It was a great platform for learning

1
15 Saurabh Borse
5

Learner's its good platform to learn new skills

R
Rohit Nandurkar
5

Best

K
Kamlesh Singh Rawat
5

Best

N
NABIN PAUDEL
5

https://www.youtube.com/@3D_Innovator for solutions

P
Pubg funny
4

Pls send me pdf of this assignment of part modelling

V
Vinay Bhadane
5

Thank you Learn Vern

S
Srijon Pal
5

too good learning experience

V
Vikash Singh
5

#Tnak your #solid work #Learn Vern

Show More
Recommended Courses
Course Content

  1. Introduction to Solidworks
    2m 13s
  2. Dowloading & Installation of Solidworks
    5m 15s
  3. Getting familiar with Interface of Solidworks
    9m 8s
  4. Customize User Interface of Solidworks
    15m 17s

  1. How to change units in Solidworks
    4m 32s
  2. Sketch Model Line, circle & rectangle tool in solidworks
    13m 22s
  3. Arc, Ellipse & Slot tool in Solidworks
    15m 13s
  4. Point, spline, Text & Construction Geometry in solidworks
    12m 14s

  1. Fillet, Chamfer & Offset tool in Solidworks
    11m 22s
  2. Trim, Extend & Splitting in Solidworks
    9m 5s
  3. Dynamic Mirror & Mirror in Solidworks
    3m 32s
  4. Move, Copy, Rotate, Scale & Stretch tool in Solidworks
    8m 10s
  5. Modify Sketch, Jog Line & Inference Line in Solidworks
    9m 39s
  6. Using Snaps in Solidworks
    20m 8s
  7. Sketch Pattern & Hatch in Solidworks
    11m 53s
  8. Rapid Sketch in Solidworks
    6m 3s
  9. Close Sketch tool, Model tool & Convert Entities in Solidworks
    6m 48s

  1. Blocks in Solidworks
    17m 31s
  2. Relation in Solidworks
    20m 9s
  3. Adding Dimension to a Sketch in Solidworks
    14m 26s
  4. Repair Sketch & Display Delete Relation in Solidworks
    8m 47s
  5. Creating 3D Sketch in Solidworks
    6m 15s
  6. Assignment : Sketch Tool
    10m 31s

  1. Entering The Part Module in Solidworks
    1m 19s
  2. Creating Extrude Boss in Solidworks
    19m 7s
  3. Creating Revolved Boss in Solidworks
    16m 19s
  4. Creating Sweft Boss in Solidworks
    15m 1s
  5. Creating Loft Boss in Solidworks
    19m 49s

  1. Extrude Cut in Solidworks
    5m 42s
  2. Revolve Cut Features In Solidworks
    5m 14s
  3. Swept Cut Features In Solidworks
    5m 47s
  4. Loft Cut Features In Solidworks
    6m 55s

  1. Implementation of Reference Plane in Solidworks
    15m 20s
  2. Reference Geometries & Coordinate System in Solidworks
    12m 41s

  1. Split Curves in Solidworks
    7m 32s
  2. Projecting Curves & Curves through reference points in Solidworks
    8m 23s
  3. Helix & Spiral Curves in Solidworks
    13m 39s

  1. Fillets in Solidworks
    24m 35s
  2. Variable Size, Face, Round Fillet & Fillet Xpert in SolidworkS
    17m 21s
  3. Chamfers in Solidworks
    12m 39s
  4. Shell in Solidworks
    7m 32s
  5. Rib in Solidworks
    10m 20s
  6. Drafts in Solidworks
    16m 50s
  7. Pattern - Part 1 in Solidworks
    20m 42s
  8. Pattern - Part 2 in Solidworks
    28m 9s
  9. Mirror in Solidworks
    4m 16s
  10. Simple Hole & Hole Wizard in Solidworks
    12m 17s
  11. Wrap Features in Solidworks
    5m 40s
  12. Vent in Solidworks
    5m 20s
  13. Dome in Solidworks
    3m 38s
  14. Body Intersection tool in Solidworks
    5m 23s
  15. Split, Delete & Multiple bodies in Solidworks
    10m 33s
  16. Link Dimensions in Solidworks
    6m 25s
  17. Design Tables in Solidworks
    5m 2s
  18. Assignment : Part Modeling
    24m 42s

  1. Introduction of Assembly Modeling in Solidworks
    1m 42s
  2. Creating Assembly & Inserting Components in Solidworks
    6m 41s
  3. Assembly & Standard Mates in Solidworks
    11m 47s
  4. Advance Mates in Solidworks
    20m 31s
  5. Mechanical Mates in Solidworks
    7m 9s
  6. Smart Mates in Solidworks
    9m 43s
  7. Mate Reference in Solidworks
    4m 13s
  8. Replace Assembly Components in Solidworks
    2m 42s
  9. Rotating & Moving Components in Solidworks
    6m 45s
  10. Using Assembly Pattern & Assembly Mirror in Solidworks
    13m 59s
  11. Exploded View in Solidworks
    11m 7s
  12. Assignment : Assembly Modeling
    15m 17s

  1. Introduction to Drawing
    3m 59s
  2. Creating Drawing & Inserting Components in Solidworks
    7m 51s
  3. Generating Views in solidworks
    21m 36s
  4. Creating Section & Detail View in solidworks
    22m 23s
  5. Adding Dimensions & Annotations in solidworks
    22m 40s
  6. Creating Exploded View, Adding B.O.M. & Balloons in Solidworks
    13m 4s
  7. Creating Flat Pattern View & Adding Tables in solidworks
    16m 26s
  8. Customizing title Block Template in solidworks
    28m 35s
  9. Assignment : Drawing
    16m 58s

  1. Base Flange in Sheet Metal Solidworks
    7m 55s
  2. Edge Flange in Sheet Metal Solidworks
    19m 33s
  3. Miter Flange & Creating Hem in Sheet Metal Solidworks
    10m 16s
  4. Jog & Break Corner in Sheet Metal Solidworks
    6m 2s
  5. Closed Corners, Rip & Sketched Bend in Sheet Metal Solidworks
    10m 22s
  6. Unfold, Fold & Flatten in Sheet Metal Solidworks
    6m 8s
  7. Lofted Bend, Cross Break & Welded Corner in Sheet Metal Solidworks
    10m 31s
  8. Forming Tool in Sheet Metal Solidworks
    15m 27s
  9. Converting Solid Part Into Sheet Metal Part Solidworks
    8m 48s
  10. Assignment : Sheet Metal
    4m 23s

  1. Introduction to Weldment
    1m 43s
  2. Entering Weldment Module in Solidworks
    1m 4s
  3. 3D Sketch in Weldment Module
    3m 46s
  4. Structure Member Feature in Weldment
    9m 23s
  5. Trim & Extend Features in Weldment
    4m 1s
  6. End Cap, Gusset & Weld Bead in Weldment
    14m 41s
  7. EXtruded Boss & Cut, Hole Wizard & Chamfer in Weldment
    5m 26s
  8. Custom Weldment Profile
    7m 16s

  1. Course Summary
    2m 18s

  1. Detail Of Bracket
    10m 50s
  2. Valve
    23m 29s
  3. Wedge
    6m 14s
  4. Design Of Kitchen sink
    24m 14s
  5. Electrical Panel Box Assembly
    35m 15s
  6. Design of machine Vice
    32m 36s
  7. Movable Jaw, Clamping Plate
    13m 6s
  8. Screw Rod, Nut m10, Lock Nut M10, Washer
    17m 2s
  9. Create Rod or Rod Cap and Screw M6
    5m 26s
  10. Assembly Of Machine Vice and Exploded View
    28m 49s

  1. Career Guideline
    47s
Enroll For Free