The dimension M10 x 25 indicates that the diameter is 10 mm. The fastener is considered to have a coarse thread because there is no thread pitch stated. The number 25 denoted a length of 25 millimetres. M10 is the designation for a matched nut, which does not require a thread pitch because it is a course thread fastener.
M10 bolts are a versatile and sturdy fastening that may be utilised in a variety of building and residential applications. Because of its hexagonal head, they can be adjusted with a spanner or wrench, and they feature a full or half threaded stem, allowing them to be used with a nut or in a tapered hole.
Sem Screws are a type of screw (Screw & Washer Attached)
It's vital to remember that when pairing a washer with a screw or bolt, the diameter of the screw or bolt's shaft should match the washer's inner diameter. A 34-16 bolt, for example, should be paired with a 34 washer.
Compact washers typically have a capacity of 2.30 to 2.45 cubic feet. Top-load washers come in sizes ranging from 3.1 to 4.0 cubic feet for both normal and high-efficiency models. Front-load high-efficiency washers come in sizes ranging from 4.0 cubic feet to 5.0 cubic feet. Most front loaders have a cubic capacity of 4.2 to 4.5 cubic feet.
Learner's Ratings
4.5
Overall Rating
74%
17%
3%
3%
3%
Reviews
P
Prajwal K
5
best guidance , Pls make a course of GD&T.
A
Abhishek Yadav
5
This Course is best for beginner to Intermediate.
M
Maddera Kumara
4
Hi, I’m at the Assembly Modeling stage.
In Exercise 4, the sectional view is unclear. Could you share a higher-quality image?
Thanks!
D
Deepak kumar
5
.
B
Bhanu Prakash Chandu R
5
The course content was clear and easy to understand. The explanations were simple, and the step-by-step teaching method made it easy to follow, even for beginners.
Share a personalized message with your friends.