AutoCAD Mechanical > Modifying Drawings

How to use chemfer command

113.3k
Overview
Now in this video, we will learn what the Chamfer command in AutoCAD. Follow Below Steps for Chamfer Command in AutoCAD: We will first type 'rectangle' in our command prompt and see many options shown to include the chamfer command. We will select the chamfer command option, and it will ask us to specify the first chamfer distance for the rectangle and after that second chamfer distance for the rectangle. After that, we will specify the first corner point on our screen and then expand our rectangle as much as we want and then click on the second point. Now we will see that on every corner point of our rectangle, the chamfer is applied. Now we will see another option, i.e., 'Fillet.' In this, we will ask to specify the fillet radius for the rectangle and then specify the first and second corner points of the rectangle. We will see that fillet has been applied according to our provided radius of the fillet on every corner point of the rectangle. Now we will see another option, i.e. 'Thickness.' In this, we will be asked to specify thickness for the rectangle, we will enter it. After that, we will draw a rectangle and observe that we are unable to see the consistency of our rectangle from a top view, so for that, we will change our perspective to the left, and we will see that the thickness of a rectangle has been changed. We can also change the rectangle view to 'isometric,' which will provide us with a better idea about the rectangle's thickness change. Another option we have is 'Width.' In this, we will ask to specify line width for rectangle, and as soon as we draw the rectangle, we will be able to see the width increase of the rectangle. Similarly, we can use another option, i.e., 'Elevation.' It will ask us to specify the height we want between two rectangles, and as soon as we provide it, the size will change for that. It can be seen in isometric view and by also changing the orbit rotation. We will see that the change in height between two rectangles."
See More

A chamfer is a beveled edge that makes a sharp corner more gradual and easier to work with. A chamfer in AutoCAD is a type of fillet (a rounded edge) that is created by offsetting one or more edges of an object. The function of this tool is to soften the corners of the design and make it easier to work with.

  • A fillet is a type of joint that is used to cover the end of a circular, square, or rectangular tube. It is typically used when the length of the tube exceeds the thickness. A fillet can also be used to cover sharp edges on metal or plastic.
  • A chamfer is a type of joint that gradually reduces the size of one surface in relation to another. It can be either a flat surface or an edge. It is often used in architecture and furniture design to soften corners and edges.

  • The fillet and chamfer tools are used to round the edges of a shape. The fillet tool creates a rounded end on an object, while the chamfer tool creates a rounded edge.
  • The first step is to select the shape that you want to round off. You can select multiple shapes at once if you want them all to be the same size. Once you have selected your shapes, go ahead and click on Fillet or Chamfer in the Draw panel. This will bring up the Fillet/Chamfer toolbar. There are two options for using this tool: You can either choose "Fillet" or "Chamfer".

The maximum distance that can be filleted or chamfered is 8" in a single pass.

The fillet and chamfer tools are used to create a smooth transition between two surfaces. The fillet tool is used to create a rounded edge on a corner or an object. The radius of the fillet can be set by the user, depending on the desired effect. The chamfer tool is used to create a slanted edge on an object, which can be used for aesthetic purposes, as well as to allow for easier access to certain objects. The height of the chamfer can also be set by the user, depending on what type of effect they want.

The chamfer command in AutoCAD is used for creating rounded edges on a surface. Chamfers are commonly used in architectural design to make the edges of a wall look nicer. It can also be used to create rounded corners on objects, such as furniture or walls.

The AutoCAD chamfer command is used to create a chamfer on an edge, which is a type of bevel. It can also be used for rounding edges, creating fillets, and more. There are many benefits of using the chamfer command in AutoCAD. One of the benefits is that it can produce a cleaner design than adding rounded edges manually. Another benefit is that it can help you avoid drawing too many lines when you need to create fillets or rounded corners. The chamfer command can also help you create complex shapes with ease and speed.

A chamfer command is used in AutoCAD to create a smooth transition between two surfaces. It can be used to make a rounded edge on an object, or it can be used to create a sharp edge on an object. Chamfers are typically used when the transition between two surfaces is not straight but curved. The chamfer command creates the shape of the curve and then adds the rounded edge around it.

In AutoCAD, chamfer is a beveled edge of an object. In order to draw a chamfer in AutoCAD, you will need to select the object, then choose the Chamfer tool from the Draw panel. As mentioned above, you can use the Chamfer tool in order to draw a beveled edge on a selected object. To do so, follow these steps: 1) Select an object that you want to create a chamfer on 2) Click on the Draw panel and then choose Chamfer from it 3) Move your mouse pointer over where you would like to start your chamfers and click on it 4) Drag your mouse down until the desired length and width of the chamfer are reached 5) Click on the Draw panel again and choose Shell from it 6) Click on the line where your chamfer meets the wall 7) Drag inside of your chamfer until you have a perfect sharp corner Note: You can also use the Line Tool to create these corners.

The chamfer command allows you to create a chamfer on the edge of a line segment. It is useful for creating decorative edges and adding depth to designs. Examples of how to use the chamfer command: Create a 3-D shape with the chamfer command. Create a rounded edge on any object with the chamfer command. Create an angled edge on any object with the chamfer command.

A chamfer tool is a tool that is used to create bevels, edges, or corners. It can be used for creating details in different types of drawings. A chamfer tool can be used to create the following shapes: Bevels Edges Corners

A chamfer toolin in AutoCAD is a tool that can be used to create a chamfer in one of the following ways: 1. Create a chamfer on an edge of an existing object 2. Create a chamfer on the end of an edge 3. Create a chamfer on the beginning of an edge 4. Create a rounded corner from two edges that are tangent to each other 5. Create a rounded corner from two edges that are parallel to each other 6. Create a rounded corner from two edges that are perpendicular to each other 7. Add or remove material at the bottom of the object 8. Add or remove material at the top of the object 9. Add or remove material at both ends of the object

Learner's Ratings

4.5

Overall Rating

  • 76%
  • 15%
  • 4%
  • 3%
  • 2%

Reviews

S
SYED USAMA ALI
5

Helpful

A
alok ranjan baral
5

thank u learnvern team

R
Rutik Maruti Bhoite
5

Obest teaching

G
GAMIT SARANBHAI BHAGUBHAI
5

so good

K
Kaibalya Kumar Mishra
5

I can renew the enerolement

K
Kaibalya Kumar Mishra
5

I can cancel all enerolement

R
RAVAL RANJIT SATISHBHAI
5

nice awesome

J
Jay Madan Chavan
5

Awesome

S
sai ravi kiran vundavalli
5

niceeeeeeeeeeeeeeeeeee

J
Jagdish Bandebuche
5

Nice course

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free