AutoCAD Mechanical > Working with Blocks, Groups and Attributes

How to defining a block with attributes

92.5k
Overview
In this tutorial, we will learn about how to create attribute in AutoCAD. Now in this video, we will learn how to define a block command with attributes. We will use the block command here by pressing the 'B+Enter' key from our keyboard. One block definition menu will open in front of our screen, and after that, we will name the block and pick a point for that block. We will keep the Object option as 'Convert to block' and then select the object. As we do this, we will press Enter key and observe that our block has been made. We have set the block unit as inches and marked Allow exploding option. After editing all the possibilities, we will press OK. As soon as we click OK, one block will open in front of our screen named 'Edit attributes'. We have written the ROOM NO and ROOM NAME, so we will edit our required values like room number as 101 and room name as Dining Room. Now we can see that the attribute will have appeared on our main screen, and we can move it according to our choice from its source point to any other point on the whole screen. If we want to use the attribute definition, we can use the insert command by pressing the 'I+Enter' key from our keyboard. We use this command insert menu will open in front of our screen, and we will click OK in that menu. After that, we will select the point where we want our attribute to display. And after that, we will follow the same method which we followed above for editing attributes.
See More

To generate the attributes, go to the Home tab>expanded block panel or the Insert tab>Block Definition panel and click Define Attributes. When you define an attribute, you must include the following information: A name-based tag that identifies the attribute (no spaces). A prompt that appears as the block is being added.

A label or tag that attaches data to a block is known as an attribute. A components list or bill of materials can be created using attribute data collected from a drawing in a spreadsheet or database. You can associate many attributes with a block as long as each attribute has its own tag.

You'll need to use the BURST command if you want to explode a block containing attributes while keeping the associated attribute value. Burst will deconstruct the block into component objects while maintaining the attribute values! Give it a shot; you'll be glad you did.

How to Make an Attribute Definition and Attach It Select the Home tab. Panel with a block Define the terms "attributes" and "values." Find. Set the attribute modes and enter tag information, location, and text options in the Attribute Definition dialogue box. Click the OK button. Make or rename a block (BLOCK).

Select a block from the Block list in the Block Attribute Manager, or click Select Block and select a block from the drawing area. Double-click the attribute you want to update in the list of attributes, or pick the attribute and click Edit.

Firstly, you need to create a new line and make it a dimension. This will create an attribute line. Secondly, you need to select the line and go to the Properties palette. Select the "Attributes" tab and then click on "Add". You can then type in what you want your attribute to be called and provide any other information that might be useful. Thirdly, you can now select this attribute in your drawing by clicking on it or selecting it from the "Selection" drop-down menu.

The following are the types of attributes in AutoCAD: -Line: A line is a two-dimensional object with length but no width -Polyline: A polyline is a two-dimensional object with length and width -Circle: A circle is a two-dimensional object with radius but no diameter -Ellipse: An ellipse is a two dimensional object with radius and diameter

Attributes in AutoCAD are a way to store information about a drawing. They can be used to store the date when the drawing was created, who created it, and other details. Attributes can be used to find drawings based on their attributes. There are many benefits of using attributes in AutoCAD. The first is that you do not need to remember what you have done in your drawings. You can use the attribute search tool to find all of your drawings that have been tagged with a particular attribute and then review them at once. Another benefit is that it allows you to organize your drawings into groups based on their attributes, which is helpful for when you need to find a specific drawing quickly or if you want an overview of all of your work within a certain category.

AutoCAD is a computer-aided design (CAD) software, which is used for designing and engineering. AutoCAD has a feature called attribute, which is used to create an attribute in AutoCAD of an object. Inserting a block is a method to insert content into AutoCAD. The two methods are not the same, but they do have some similarities. For example, both of them require you to know how to use the software in order for it to be done correctly and both can be done by clicking on the desired option in the menu bar or toolbar. The difference between inserting a block and creating an attribute in AutoCAD is that inserting blocks only inserts content into AutoCAD while creating attributes creates properties that can change how objects are drawn on screen and can also affect other objects.

The attribute block is a specialized block that can be used to store information about a drawing. It can be used to store any information about the drawing that you want, such as the title, scale, date it was created, or revision number. To create an attribute block in AutoCAD: 1.Create a new layer called "Attributes" 2.Click on the "Insert" tab on the ribbon and select "Attribute Block" from the drop-down menu 3.Use the mouse to draw out a rectangle for your attribute block and then click on it to open its properties box 4.Enter in any desired text for your attribute's content (e.g., "Title", "Date") 5.Enter in the appropriate value of your attribute's attribute type, e.g., "Title", "Date" 6.Insert any number of your attribute's attribute values (e.g., "Title" 7.Adjust the layout and spacing of the text in your attributes block as needed

Learner's Ratings

4.5

Overall Rating

  • 75%
  • 16%
  • 4%
  • 3%
  • 2%

Reviews

P
priyatam kumar
5

this website by excellent teacher by provide course.

N
Neetesh Kumar Ahirwar
5

good for freshers.

T
Tarun Maiti
5

very good couts

J
Jotino João
5

NOT SUGEST

S
surendra pal sharma
5

Good job

S
sharanu dhali
5

good explanation

H
Husnain Sabri
5

Help full so much

S
Subhash Kumar
5

very nice app for learning autocad

G
Gaurav Bhagwan Thombare
5

Nice

H
HEMANT SAWANT
5

nice

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free