AutoCAD Mechanical > Creating Drawing

How to draw revision cloud

114.3k
Overview
In this video we will see that how we will learn about AutoCAD Revision cloud and How to Draw Revision cloud in AutoCAD in detail. Revision cloud is used to highlight any part of particular drawing. To enter it in command prompt we will write 'REVCLOUD' in AutoCAD and then revision cloud will get active and then we can draw our cloud by moving our mouse with left button of it pressed. We can also set the revision cloud arc in AutoCAD. In that we can provide maximum and minimum size of our arc. The revision cloud arc in AutoCAD is a way of structuring the revision process. It has three main phases: the first one is the planning phase, which is where you identify what you need to revise and what your goal is; the second one is the revision phase, where you revise your work and make sure it meets your goal; and lastly, there's a next-step planning phase, where you review what went well in your revision process. The Revision Cloud Arc has been used by many companies as a tool for managing their content writing processes. It helps them identify their goals and how they want to improve their content writing skills. How to use revision cloud arc in AutoCAD? Revision cloud arc is a tool that can be used by AutoCAD users to create and modify arcs. It is an extension of the revision cloud that has been included in the AutoCAD software since 2012. The revision cloud arc can be found in the options menu and it is not editable by default. To edit it, you need to click on "edit" button which will open a new window where you can make changes. Once you have made changes, click on "save" button to save the changes and close the window. Now suppose if I have drawn any drawing and we have highlighted some part with any particular object, and now we want to convert that particular object to revision cloud, then we can use object option from command prompt, and select that object, we will see that it will be converted into revision cloud. We can also change the direction of arc by reversing it. Now suppose if we want to make rectangular revision cloud then we can use 'rectangle' option from the command prompt window of revision cloud and one rectangle revision cloud will be drawn now. We can also draw revision cloud for any polygon by using 'polygon' option from command prompt window of revision cloud. We can also change the style of a revision cloud to 'Calligraphy' by using 'Style' option from Command prompt window of revision cloud.
See More

  • A revision cloud is a kind of annotation in AutoCAD. It's a way to show the changes made in an AutoCAD drawing over time. A revision cloud is a kind of annotation in AutoCAD. It's a way to show the changes made in an AutoCAD drawing over time.
  • It is very important for designers and engineers to see the changes they have made to their drawings, and how those changes affect other parts of their design. Revision clouds allow them to do this by providing a visual representation of the revisions that have been made, and how they relate to each other.

The scale of a revision cloud in Autocad can be changed by changing the font size of the text. To change the font size, select the text and then type “ZOOM” in the command line.

Revision clouds are a great way to organize your thoughts and make sure you have a clear idea of what you want your paper to say. A revision cloud is a quick way to brainstorm ideas and organize them in one place. You can create many revision clouds at once by using the "New Revision Cloud" button on the right side of the screen.

  • Revision clouds are a great way to visualize the changes that have been made to a document. It can be used by teachers, authors, and students.
  • The revision cloud is made up of the original text on the left and all of the edits or revisions on the right. The lines that connect them are called branches. The longer the branch, the more revisions have been made.
  • The best way to create revision clouds is to use Google Docs or Microsoft Word Online because they allow users to upload their documents for revision clouds with ease.

Revision clouds are a great way to see how your content is performing in relation to its competitors. They are also a useful tool for identifying the weaknesses of your content. A revision cloud is a graphical representation of the relative popularity or performance of different pieces of content. You can use it to identify the strengths and weaknesses of your content. This will help you improve your content and make it more engaging for readers.

You can create a cloud in AutoCAD by using the cloud command in AutoCAD option and choosing the type of cloud you want to use. Clouds can be created with different types of materials such as smoke, water, or fire. The best way to create a cloud is to start with a sphere and then apply the "Smoke" material. You can also apply "Water" or "Fire" material to make it look really cool!

There are two ways to draw a cloud in AutoCAD. One is to use the 3D Cloud tool, and the other is to use a cloud pattern. To draw a 3D cloud, you need to first create the base of your cloud by drawing a rectangle with dimensions of 10x10x10. Then, choose the 3D Cloud tool from the ribbon and pick an angle from -45° to 45° for your base. You can also change the size of your rectangle as you create it by changing its height/width ratio. Finally, pick a color for your base and start drawing on it while changing colors as you go along. To draw a 2D cloud pattern, first create an object with dimensions of 10x10x10 using either an existing object or one that you create.Then, using the menu Draw; Draw Clouds, you can draw a cloud pattern on your object.

The revision cloud is a graphical representation of the changes made to a drawing. It is also known as the “undo” button in AutoCAD. The revision cloud can be changed by using two different methods: Using the Size menu in the Edit menu Using command line interface (CLI) Using an AutoCAD extension like RevCloud

Revcloud in AutoCAD is a feature that helps to create a 3D model of the object. It is used to adjust the scale of the model. In order to use this feature, you need to make sure that you are using AutoCAD 2018 or later. You also need to have the right settings in your preferences. To change the scale for a selected object, click on it and then select Revcloud from the dropdown menu. To adjust revcloud scale in AutoCAD for all objects, go through your preferences and select Scale from Revcloud from the dropdown menu.

If you are looking to change the size of your revision cloud arc in AutoCAD, then you need to make sure that you have access to the “Options” menu. You can access this menu by clicking on the “View” tab at the top left corner of your screen. Once you are in the Options menu, scroll down and click on “Display Options.” Then go ahead and click on “Arc Size.” Once that is done, adjust the arc size according to your preference.

Learner's Ratings

4.5

Overall Rating

  • 76%
  • 15%
  • 4%
  • 3%
  • 2%

Reviews

K
Kaibalya Kumar Mishra
5

Plise i cansul the enerolement

P
Pankaj Kumar
5

VERY VERY HELPFULL

S
SYED USAMA ALI
5

Helpful

A
alok ranjan baral
5

thank u learnvern team

R
Rutik Maruti Bhoite
5

Obest teaching

G
GAMIT SARANBHAI BHAGUBHAI
5

so good

K
Kaibalya Kumar Mishra
5

I can renew the enerolement

K
Kaibalya Kumar Mishra
5

I can cancel all enerolement

R
RAVAL RANJIT SATISHBHAI
5

nice awesome

J
Jay Madan Chavan
5

Awesome

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free