AutoCAD Mechanical > Solid Editing With 3D

How To Use Fillet Edge and Chamfer Command

92.5k

Between Two Objects or Line Segments of a 2D Polyline, Add A Fillet Select the Home tab. Make changes to the panel Drop-down menus for Chamfer and Fillet Fillet. Find. Select the first item or line segment in the drawing area that will establish the arc's points of tangency. Choose the second object or line segment to work with.

To make slanted edges in AutoCAD, use the chamfer command. As seen in the image below, we must choose two nearby lines to make a chamfer between them: The lines 1 and 2 are the ones that have been chosen. The chamfer can be made by setting the chamfer distance or angle.

The steps are as follows:

  • From the ribbon panel, choose the Fillet command. Alternatively, on the command line, type M or Multiple.
  • Enter the code.
  • Choose the first item.
  • On the command line, type R or Radius.
  • Enter the code.
  • Set the radius of the fillet. For instance, 1. press the Enter key.

To Chamfer a Three-Dimensional Solid:

  • Select the Solid tab. Editing panel that is solid Chamfer Edge is a type of chamfer. Find.
  • Choose the edge you want to chamfer. The chamfer is shown in a preview.
  • Choose one of the following options:
  • Set the distances between the base surface and the next-to-it surface.
  • Choose one of the following options:
  • Press Enter to finish the chamfer.

Learner's Ratings

4.5

Overall Rating

  • 75%
  • 16%
  • 4%
  • 3%
  • 2%

Reviews

P
priyatam kumar
5

this website by excellent teacher by provide course.

N
Neetesh Kumar Ahirwar
5

good for freshers.

T
Tarun Maiti
5

very good couts

J
Jotino João
5

NOT SUGEST

S
surendra pal sharma
5

Good job

S
sharanu dhali
5

good explanation

H
Husnain Sabri
5

Help full so much

S
Subhash Kumar
5

very nice app for learning autocad

G
Gaurav Bhagwan Thombare
5

Nice

H
HEMANT SAWANT
5

nice

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free