AutoCAD Mechanical > Modifying Drawings

How to use divide and measure command

114.1k
Overview
Divide Command in AutoCAD In this video, we will see how we can measure and divide the object in AutoCAD. We will start with the 'Divide' command. The shortcut key which we use for the divide command is the 'D+I+V+Enter' key. we will first ask us that select object we want to divide so that we will select the object. And after that, it will ask us that enter the number of segments we want, so we will enter the number of segments and then the line divided into that many segments. Measure Command in AutoCAD Another command which we are going to talk about is the Measure command in AutoCAD. The shortcut key which we use to measure the command is the 'M+E+Enter' key. We will first ask to select the object only and then specify the distance between the two segments we want. So this will have segments according to our specified length. We can also convert any other object into one particular block as per our requirement. For that, we will first press the 'B+Enter' key and then select the pick point of the thing. After that, using the select object tool, we will choose our object, and at last, choose the option of Convert to block and press 'OK'. We need to name this block with something. And after that, we can select this block by its name from a command prompt, and after that, we will enter the number of segments we want where this block will be kept. So in this way, we can use the divide and measure command in AutoCAD.
See More

It is possible to divide a line in Autocad by selecting the line and then clicking on Divide. You can also select the line and then click on the Divide button in the Home tab. The final way to divide a line is by using a command that will create two lines from one. To do this, you need to select the line and then go to Tools > Break Lines.

  • There are many ways to measure the distance between two objects in AutoCad. The easiest way to measure the distance between two points is by using the line command. This is done by typing "line" and then selecting two points on your screen. The default units for this measurement are in inches.
  • Another way to measure the distance between two points is by using a radius of a circle. To do this, you would need to use the "circle" command and then enter in both of your points as coordinates of where you want the center point of your radius to be. A third way is by using a line segment that has been drawn with an arc or ellipse tool and measuring it with a ruler tool.

  • The first step is to draw a circle. The second step is to divide the circle into quarters. The third step is to divide the quarter into 3 equal parts. The fourth step is to divide each of these three parts into 3 equal parts.
  • The fifth step is to take the three parts at the top of your diagram and divide them in half, horizontally and vertically. These are your first two segments. Repeat this process for all other segments, making sure that you alternate between horizontal and vertical division lines each time you create a new segment.

  • A point is the intersection of two lines. The distance between two points can be calculated by using the Pythagorean theorem. The problem with finding the center point is that there are many ways to find it, depending on what you are trying to do with it.
  • For example, if you want to find the center point of a circle, you will need to calculate the diameter and divide it by 2. If you want to find the center point of a triangle, then you need to use its three sides and find its height.

  • The most popular way to divide a circle into 12 equal segments is to use a protractor. First, draw a line from the center of the circle to the edge. Next, place the protractor on this line and rotate it so that its zero degree mark is on the edge of the circle. Now, measure off 12 equal divisions from this point.
  • The second method is to use a compass and straightedge. First, draw a line from one edge of the circle to another and then extend it outside of the circle's boundary by 1/12th of its radius. Next, draw another line at right angles with this one and mark off 12 divisions on it with a compass or ruler.

A measure command in AutoCAD is a tool that lets you draw rectangles, circles, arcs, and ellipses. It is very useful in drawing dimensions of objects. A measure command can be used to create a rectangle or an ellipse. There are many other options for the measure command too. A measure command in AutoCAD is used to define a specific distance, length, or angle. It can also be used to create a new entity and give it a dimension. In AutoCAD, the measure command is denoted by the letter "M".

AutoCAD has a lot of line types which are divided into two categories: Continuous lines: these are the lines that have no endpoints and they can be drawn with the Line command. Endpoint lines: these are the lines that have an endpoint, which is called a corner point. They can be drawn with the Polyline command. The easiest way to divide a line is by using the Divide command in AutoCAD. This will divide one continuous line into two separate ones.

The divide command in AutoCAD divides the object by a line, by a point, or by a polyline. The divide command in AutoCAD is used to divide objects. The command can be used to divide an object into two parts, three parts, or four parts. The command can also be used to make one object into two objects with the same size and shape. The divide command is available in all versions of AutoCAD since the release of AutoCAD 2000.

The measure command in AutoCAD, is used to create a new entity. This command can be used to create a line, arc, circle, or polygon. The measure command in AutoCAD, is used to create new entities. These entities can be lines, arcs, circles or polygons. The measure command creates these entities by creating two points on the screen and then creates an entity between these two points. For example: Measure from point A to point B This will create an arc from point A to point B on the screen.

AutoCAD is a computer software application that is used to design 2D and 3D architectural drawings, mechanical engineering designs, and more. The divide command in AutoCAD can be used to divide a line into two or more segments. This command can be helpful when you need to create an arc or a circle. To use the divide command in AutoCAD, right-click on the line that you want to divide, choose Divide from the context menu, then enter the number of segments you want your line segment to have.

You can use the Divide command in AutoCAD to divide a rectangle into 3 equal parts. This is done by specifying the first point of division on one side of the rectangle and then specifying two more points on the opposite side of the rectangle.

The measure and divide command is a tool in AutoCAD that helps users to calculate lengths, areas, volumes and other geometric shapes. It is important to note that this command can be used on both 2D and 3D objects. This means that it can be used in any design or engineering project. The measure and divide command has many advantages such as: It allows users to create accurate measurements on any object without the need of using a ruler or tape measure. It is a very time-saving tool because it helps users to quickly generate accurate measurements for their designs.

Learner's Ratings

4.5

Overall Rating

  • 76%
  • 15%
  • 4%
  • 3%
  • 2%

Reviews

P
Pankaj Kumar
5

VERY VERY HELPFULL

S
SYED USAMA ALI
5

Helpful

A
alok ranjan baral
5

thank u learnvern team

R
Rutik Maruti Bhoite
5

Obest teaching

G
GAMIT SARANBHAI BHAGUBHAI
5

so good

K
Kaibalya Kumar Mishra
5

I can renew the enerolement

K
Kaibalya Kumar Mishra
5

I can cancel all enerolement

R
RAVAL RANJIT SATISHBHAI
5

nice awesome

J
Jay Madan Chavan
5

Awesome

S
sai ravi kiran vundavalli
5

niceeeeeeeeeeeeeeeeeee

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free