How To Work With Hatches In AutoCAD?

An AutoCAD hatch is used to fill an enclosed area with a pattern. Hatching can be used to represent shading, texture, or other surface variations in drawings. There are two types of hatches: 1) Patterned hatch 2) Gradient hatch. Hatch Patterns are created by specifying the boundary of the area to be hatched and then specifying a pattern to use for filling that area. The boundary can be drawn with any line style, thickness, and color. The pattern may consist of any combination of straight lines, arcs, or polylines. Gradient Hatches work by changing the color gradually from one point on the boundary to another point on the boundary while maintaining a constant thickness along that entire segment of the boundary.

How To Find Area in AutoCAD Drawings?

There are a few ways to find the area of an AutoCAD drawing. The first way is to select the desired object and use the Area command. This command will calculate the area of any selected objects. Another way is to use the Properties palette. This will give you an accurate area measurement for any selected object or group of objects. The third way is to use a formula in order to calculate the area of an AutoCAD drawing. The formula for calculating this would be Length * Width, which would be written as L*W in your AutoCAD program.

How To Create a Hatch In AutoCAD?

There are four types of gradients: linear, radial, conical, and angular: Linear gradients move from one color to another in a straight line. Radial gradients start at a single point and move outward in every direction. Conical gradients start at a single point and move outward in a circular motion. Angular gradients start at a single point and move outwards in an angle-like motion.

Course Content

Introduction of AutoCAD

4m 13s

How to use LearnVern

3m 20s

How to change Workspace in AutoCAD

4m 47s

How to set units in drawing

3m 3s

How to use zoom and pan command

4m 26s

How to draw a line

5m 32s

How to draw line using co-ordinate system

5m 59s

How to draw rectangle

5m 21s

How to draw a circle

8m 6s

How to draw ellipse

4m 59s

How to draw polygon

5m 7s

How to draw arc

9m 2s

How to draw revision cloud

4m 26s

How to draw spline

5m 25s

How to draw polyline

6m 43s

How to draw construction line, ray and multiple points

9m 38s

How to select drawing and types of selection.

4m 36s

How to use move command

4m 45s

How to use copy command to copy any object

4m 27s

How to use stretch command

3m 34s

How to use scale command

3m 54s

How to use rotate command

5m 2s

How to use mirror command

3m 28s

How to use offset command

6m 47s

What is rectangular array and how to use it?

9m 7s

What is polar and What is path array and how to we can use it?

9m 21s

How to use fillet command

5m 25s

How to use chemfer command

6m 18s

How to use trim command

6m 57s

How to use extend command

4m 49s

How to use break, join, erase and oops, undo and redo commands

8m 19s

How to use solid, donut, fill and fill mode

6m 30s

How to use lengthen command

5m 24s

How to draw multiline and style

10m 5s

How to use divide and measure command

5m 57s

how to use function keys and ortho key.

5m 15s

How to use osnap function key

14m 48s

How to use grid and snap function keys.

4m 53s

How to use polar, otrack and dynamic input?

How to use function key and isocircle.

11m 2s

Which are the different types of hutches and how to use it

Which are the different types of boundry and other options of hatch

6m 52s

How to measure the object using inquiry command

7m 20s

How to creating dimension using dimension tools

7m 47s

How to modifying the dimension

12m 33s

How to create new dimension style and which are the options

27m 22s

How to work with multileader

7m 45s

How to create text using single line text and multiline text

13m 2s

How to create new text style and how to edit old text style

4m 2s

How to create table and which are the new table style

8m 13s

How to edit table and how to import table from excel

4m 54s

How to change object color, line type, and line type scale

7m 23s

How to create layers

5m 53s

How to use layer dropdown menu

7m 29s

How to import and export layer files using layer states manager

4m 51s

How to change line weight and how to use match property

6m 10s

How to hide and isolate objects

2m 36s

How to copy, cut, and paste object

3m 5s

How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block

7m 1s

How to create group and use of group command

How to create block using block command

5m 20s

How to use block using insert block command

7m 42s

How to create own library in autoCAD using write block

5m 2s

How to use attribute definition

3m 32s

How to defining a block with attributes

6m 48s

How to attatch any file in the drawing using xref command

4m 48s

How to use attaching and overlaying xref

4m 38s

How to remove xref file in the drawing

7m 4s

How to Design Center and Tool Paletts

11m 53s

How to create layout

7m 55s

How to create title block using attribute block and template

15m 42s

How to use etrasmit

4m 10s

How to ploting drawing & conversion to pdf,jpg,png & other format

5m 53s

Exercise of Array

33s

Exercise Of Assambly

33s

Exercise Of Circle,Line,Trim

38s

Exercise Of Fillet Circle Polygon

21s

Exercise Of Isomatric Drawing

33s

Isometric Project

16m 28s

Mechanical Project

8m 25s

How to change Workspace and Visual Style for 3D

4m 24s

How to Create Box Cylinder and Cone

14m 52s

How to Create Sphere Pyramid Wedge and Torus

10m 42s

How To Use Extrude Command

5m 15s

How To Use Revolve Command

4m 55s

How To Use Sweep Command

6m 25s

How To Use Loft Command

2m 47s

How To Use Presspull Command

3m 7s

How to Create Wall with Poly solid, Extrude and Press pull

9m 10s

How to Use Boolean Operation

7m 58s

How To Use Ucs and Dynamic Ucs Command

13m 10s

How To Use 3D Orbit Command?

2m 58s

How To Use 3D Array Command

4m 58s

How To Use 3D Rotate Command

6m 6s

How To Use 3D Move Command

1m 53s

How To Use 3D Mirror Command

6m 15s

How To Use Align And 3D Align Command

4m 40s

How To Use Slice Command

7m 30s

How To Use Imprint and Solid Edit Command

5m 28s

How To Use Taper Face, Extrude Face and Offset face

5m 27s

How To Use Shell Command

2m 49s

How To Use Fillet Edge and Chamfer Command

5m 42s

How To Use Extract and Offset Edges Command

4m 45s

How To Use Interfere Command

3m 4s

How To Use Section

6m 30s

How To Use Planar and network Command

3m 30s

How To Use Extrude Command in 3D

2m 53s

How To Use Revolve Command in 3D

2m 49s

How To Use Sweep and Loft Command

4m 8s

How To Use Blend, Patch, Offset and extend commands

8m 40s

How To Use Trim, Untrim and fillet Commands

2m 52s

How To Material Applying Editing

11m 43s

How To Applying Lighting And Rendering

11m 14s

AutoCAD 3D Exercise

2m 43s

AutoCAD 3D Project-1

13m 3s

AutoCAD 3D Project-2

12m 30s

AutoCAD Final Quizes

11h 45m

Which are the different types of boundry and other options of hatch

AutoCAD Mechanical Hatch and Gradient

Enroll Now For Free

Discussion

Course Content

Introduction of AutoCAD

4m 13s

How to use LearnVern

3m 20s

How to change Workspace in AutoCAD

4m 47s

How to set units in drawing

3m 3s

How to use zoom and pan command

4m 26s

How to draw a line

5m 32s

How to draw line using co-ordinate system

5m 59s

How to draw rectangle

5m 21s

How to draw a circle

8m 6s

How to draw ellipse

4m 59s

How to draw polygon

5m 7s

How to draw arc

9m 2s

How to draw revision cloud

4m 26s

How to draw spline

5m 25s

How to draw polyline

6m 43s

How to draw construction line, ray and multiple points

9m 38s

How to select drawing and types of selection.

4m 36s

How to use move command

4m 45s

How to use copy command to copy any object

4m 27s

How to use stretch command

3m 34s

How to use scale command

3m 54s

How to use rotate command

5m 2s

How to use mirror command

3m 28s

How to use offset command

6m 47s

What is rectangular array and how to use it?

9m 7s

What is polar and What is path array and how to we can use it?

9m 21s

How to use fillet command

5m 25s

How to use chemfer command

6m 18s

How to use trim command

6m 57s

How to use extend command

4m 49s

How to use break, join, erase and oops, undo and redo commands

8m 19s

How to use solid, donut, fill and fill mode

6m 30s

How to use lengthen command

5m 24s

How to draw multiline and style

10m 5s

How to use divide and measure command

5m 57s

how to use function keys and ortho key.

5m 15s

How to use osnap function key

14m 48s

How to use grid and snap function keys.

4m 53s

How to use polar, otrack and dynamic input?

How to use function key and isocircle.

11m 2s

Which are the different types of hutches and how to use it

Which are the different types of boundry and other options of hatch

6m 52s

How to measure the object using inquiry command

7m 20s

How to creating dimension using dimension tools

7m 47s

How to modifying the dimension

12m 33s

How to create new dimension style and which are the options

27m 22s

How to work with multileader

7m 45s

How to create text using single line text and multiline text

13m 2s

How to create new text style and how to edit old text style

4m 2s

How to create table and which are the new table style

8m 13s

How to edit table and how to import table from excel

4m 54s

How to change object color, line type, and line type scale

7m 23s

How to create layers

5m 53s

How to use layer dropdown menu

7m 29s

How to import and export layer files using layer states manager

4m 51s

How to change line weight and how to use match property

6m 10s

How to hide and isolate objects

2m 36s

How to copy, cut, and paste object

3m 5s

How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block

7m 1s

How to create group and use of group command

How to create block using block command

5m 20s

How to use block using insert block command

7m 42s

How to create own library in autoCAD using write block

5m 2s

How to use attribute definition

3m 32s

How to defining a block with attributes

6m 48s

How to attatch any file in the drawing using xref command

4m 48s

How to use attaching and overlaying xref

4m 38s

How to remove xref file in the drawing

7m 4s

How to Design Center and Tool Paletts

11m 53s

How to create layout

7m 55s

How to create title block using attribute block and template

15m 42s

How to use etrasmit

4m 10s

How to ploting drawing & conversion to pdf,jpg,png & other format

5m 53s

Exercise of Array

33s

Exercise Of Assambly

33s

Exercise Of Circle,Line,Trim

38s

Exercise Of Fillet Circle Polygon

21s

Exercise Of Isomatric Drawing

33s

Isometric Project

16m 28s

Mechanical Project

8m 25s

How to change Workspace and Visual Style for 3D

4m 24s

How to Create Box Cylinder and Cone

14m 52s

How to Create Sphere Pyramid Wedge and Torus

10m 42s

How To Use Extrude Command

5m 15s

How To Use Revolve Command

4m 55s

How To Use Sweep Command

6m 25s

How To Use Loft Command

2m 47s

How To Use Presspull Command

3m 7s

How to Create Wall with Poly solid, Extrude and Press pull

9m 10s

How to Use Boolean Operation

7m 58s

How To Use Ucs and Dynamic Ucs Command

13m 10s

How To Use 3D Orbit Command?

2m 58s

How To Use 3D Array Command

4m 58s

How To Use 3D Rotate Command

6m 6s

How To Use 3D Move Command

1m 53s

How To Use 3D Mirror Command

6m 15s

How To Use Align And 3D Align Command

4m 40s

How To Use Slice Command

7m 30s

How To Use Imprint and Solid Edit Command

5m 28s

How To Use Taper Face, Extrude Face and Offset face

5m 27s

How To Use Shell Command

2m 49s

How To Use Fillet Edge and Chamfer Command

5m 42s

How To Use Extract and Offset Edges Command

4m 45s

How To Use Interfere Command

3m 4s

How To Use Section

6m 30s

How To Use Planar and network Command

3m 30s

How To Use Extrude Command in 3D

2m 53s

How To Use Revolve Command in 3D

2m 49s

How To Use Sweep and Loft Command

4m 8s

How To Use Blend, Patch, Offset and extend commands

8m 40s

How To Use Trim, Untrim and fillet Commands

2m 52s

How To Material Applying Editing

11m 43s

How To Applying Lighting And Rendering

11m 14s

AutoCAD 3D Exercise

2m 43s

AutoCAD 3D Project-1

13m 3s

AutoCAD 3D Project-2

12m 30s

Which are the different types of boundry and other options of hatch

Surface Boundaries in AutoCAD

This video will learn about the different types of boundaries and other options of Hatch in AutoCAD.

Now, suppose if we have two objects, an open object with an open Boundary, and the other is a closed object with a close Boundary.
Now, suppose if we have two objects, one is an open object with an open Boundary, and the other is a closed object with a close Boundary.
So when we have a close object, we pick points, choose our pattern, click inside the thing, and our design appears inside the object. But when we have the open object, we cannot follow this method; we will get an error.

So in the case of an open object, we first need to select that object and then apply the selected pattern—the pattern drawn accurately.

We can also apply different types of hatch together in an object and see them together by managing the Hatch Transparency.

We can also set our pattern's origin by using the 'Set Origin' option from properties in the command menu. It will start the pattern from the point we select as the origin.

We can also copy the hatch properties from one object to another by using the Match properties option.

We need to activate this property and click on the pattern which we want to copy and then click inside the object where we want that pattern to appear.

FAQs

An AutoCAD hatch is used to fill an enclosed area with a pattern. Hatching can be used to represent shading, texture, or other surface variations in drawings.

There are two types of hatches:

1) Patterned hatch

2) Gradient hatch.

Hatch Patterns are created by specifying the boundary of the area to be hatched and then specifying a pattern to use for filling that area. The boundary can be drawn with any line style, thickness, and color. The pattern may consist of any combination of straight lines, arcs, or polylines.
Gradient Hatches work by changing the color gradually from one point on the boundary to another point on the boundary while maintaining a constant thickness along that entire segment of the boundary.

There are a few ways to find the area of an AutoCAD drawing. The first way is to select the desired object and use the Area command. This command will calculate the area of any selected objects.
Another way is to use the Properties palette. This will give you an accurate area measurement for any selected object or group of objects. The third way is to use a formula in order to calculate the area of an AutoCAD drawing. The formula for calculating this would be Length * Width, which would be written as L*W in your AutoCAD program.

There are four types of gradients: linear, radial, conical, and angular:

Linear gradients move from one color to another in a straight line. Radial gradients start at a single point and move outward in every direction. Conical gradients start at a single point and move outward in a circular motion. Angular gradients start at a single point and move outwards in an angle-like motion.

Hatches are a great way to create a sense of community and promote collaboration. They also provide an opportunity for people to be creative and express themselves. Hatches can be used as a group project where each member contributes something different. This is perfect for students or coworkers who need to work together on a project but don't know each other well yet.

Hatch patterns are a type of linear drawing that can be used to create textures and patterns. The most common types of hatch patterns are cross-hatching, pointillism, and stippling.