AutoCAD Mechanical > Modifying Drawings

What is polar and What is path array and how to we can use it?

88.2k
Overview
In the last video, we have seen a rectangular array, and now we will see what path and polar arrays are and how to use Path and Polar Arrays in AutoCAD. To select the path array command, we can modify the panel and select it from the array command options. First of all, we will select any object, and then from the command prompt, we can choose the path array option. After doing this, we can see that the thing we selected will appear on the shown path. We can see that we cannot edit the item number. At the same time, we can change the space distance between every object. We have been using the 'Measure' option, so we cannot change the item number, so we will revise the option to 'Divide,' which will allow us to enter the number of items we want in our path. Using this option, we cannot enter the space distance between every object according to us. We also have an option of 'Align items,' which will copy the original position of the object we selected and give all other object items in the same format. We also have an option of 'Align items,' which is, when kept OFF, will copy the original position of the object we selected and will give all other object items in the same format. While when it is ON, it will follow the path, and the object will be drawn accordingly. We can use the 'Tangent direction' option if we want the object to follow the line on which we are placing all our objects. For that, we will need to select one a starting in one ending point of the object. In this, the object will be tangent to the path. The polar array command in AutoCAD is used to create a set of concentric circles. A polar array is a set of concentric circles that are created by the polar array command in AutoCAD. The command can be used to create a set of concentric circles in any size, depending on the radius and number of divisions that are specified. The steps for creating a polar array are: 1) Create an object and select the Polar Array tool from the radial array group on the Home tab 2) Click on an object while holding down Shift key 3) Drag the cursor in any direction and release it 4) Select another object and click it while holding down Shift key 5) Repeat step 4 until all desired objects are selected
See More

A polar array in Autocad is a type of linear array in which the spacing between the elements is not constant. The spacing between the elements in a polar array can vary. This type of linear array is useful when you want to create an irregular shape for your object.

  • Path array is a technique for organizing the layout of elements in a design. Paths are created by connecting nodes. Path arrays are used to organize the layout of elements in a design. Paths are created by connecting nodes and the paths can be either straight or curved. The path can also be made up of straight lines, arcs, or curves that have been smoothed out with lines to create an aesthetically pleasing design.
  • Path arrays are used for both print and digital designs. They have many benefits including being able to accommodate changes in content without having to redo the whole design, being able to create smooth transitions between sections on a page, and being able to make complex shapes with ease because they use simple shapes like circles and squares as building blocks.

  • ARRAYPATH command is used to create a polyline of a specified number of equally spaced points. The ARRAYPATH command can be used to create a polyline of a specified number of equally spaced points. The ARRAYPATH command can be found on the Draw panel and it is located in the Polyline sub-command group. It is also available on the Home tab.
  • The first step in using this command is to select an insertion point or pick an object that will serve as the starting point for your polyline. You then enter the number of points you want in your polyline and press Enter after typing it in.

  • The ARRAYPATH command is used to create a path for the file that will be exported. The path is created by specifying the files and folders that are needed in order to export the file.
  • The ARRAYPATH command can be used with a single folder or multiple folders. When it is used with a single folder, it will export all of the files in that folder. When it is used with multiple folders, it will export all of the files in those folders, and any subfolders within those folders.

The arguments that can be used with this command are:

  • help: show this help message and exit
  • version: print the version of the program and exit
  • file=FILE: specify a file to process
  • exclude=PATTERN: exclude files matching PATTERN
  • include=PATTERN: include files matching PATTERN

An array is a group of objects that are arranged in a pattern. There are two types of arrays in AutoCAD: polar and path arrays. A polar array is a circular arrangement of objects with the same distance from the center. A path array is a linear arrangement of objects in which each object has the same distance from the previous object. Polar arrays are typically used to create circular patterns, such as a row of trees around a pond or flowers on the edge of a garden bed. Path arrays are used to create linear patterns, such as stripes and checkerboard designs.

An array is a group of objects that are positioned in the same location. In AutoCAD, an array can be created by selecting a set of objects and specifying the number of copies to make. The AutoCAD will then create an exact copy of each object in the selection and distribute them evenly across the specified distance. An array can also be created by specifying a distance and then selecting a set of objects that will be copied to that location.

Rectangular array is a type of linear array where the objects are arranged in rows and columns. Objects in a rectangular array are either parallel or perpendicular to the axis. Polar arrays in AutoCAD are also known as radial arrays. They are a type of linear array, but objects are arranged around a central point called the pole. Rectangular: -Objects are arranged in rows and columns -Objects can be parallel or perpendicular to the axis Polar: -Objects are arranged around a central point called the pole -Objects can be around either the same axis or perpendicular

Orienting a rectangular array in AutoCAD is a common and straightforward task. It can be done by using two methods, which are rotation and reflections. In this tutorial, we will use rotation to orient a rectangular array. Step 1: Launch AutoCAD and create a new drawing by selecting the acad icon on the desktop or select New from the File menu. Draw 2 rectangles with dimensions of 10 x 10 (make sure that they are aligned). Step 2: Select one of the rectangles, right-click and select Rotate from the context menu. The Rotate dialog box will pop up on screen with options for rotating the selected object. Step 3: Click on the arrow next to Rotation Axis and change the values to 60 degrees. Step 4: Click OK to exit the dialog box and rotate the rectangle clockwise. Step 5: Repeat steps 2-4 for each of the other two rectangles in your drawing, rotating them both by a total of 90 degrees.

Polar arrays in AutoCAD are a great way to organize your annotation. They allow you to create a symbol and then use it as many times as you want in the drawing. You can also use polar arrays to create different types of symbols for your annotation, like circles, rectangles, or even text. To trim a polar array in AutoCAD: 1) Select the polar array 2) Right-click on the selected polar array 3) Click "Trim Polar Array"

A path array in AutoCAD is a series of lines that are connected by arcs. It is used in AutoCAD to represent the outline of a polyline. This helps in creating a smooth shape for any object or to give it a more natural look. The path array can be used as a single object or as an object inside another object.

Learner's Ratings

4.5

Overall Rating

  • 75%
  • 16%
  • 4%
  • 3%
  • 2%

Reviews

P
Pal Gohain
5

Very good course.

S
SUNIL RANA
5

Very good course i am haapy

H
Harsh Kumar
5

Very good course and nice teacher

V
VISHAL KUMAR
5

Very good app for the knowledge

S
Shashank shekhar srivastav
5

VERY GOOD

R
RISHABH ROYCE HARRY
5

Informative.

P
Pratik Samanta
5

easy to understand........

S
SHRIRAM KUMAR KAMAT
5

Very wonderfull Session or Cours

P
Pankaj Sanjay Patil
5

Good

M
Manva Ameya Pashte
4

Very nice course

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free