AutoCAD Mechanical > Modifying Drawings

What is rectangular array and how to use it?

92.5k
Overview
In this video, we will learn about what is Rectangular array in AutoCAD and how to Use Rectangular Array in AutoCAD. To select the array command, we can modify the panel and select it from the command prompt window. The shortcut key for the rectangular array command in AutoCAD is the 'A+R+Enter' key. We have three types of array option, Rectangular array Path array Polar array We will first select the array command, and then it will ask us to select the object so that we will select our desired object, and then in the command prompt, we will select the 'Rectangular' option. It will create a row and column of the object which we selected. We can change the number of columns and rows from the upper menu. We can also change the distance between two objects from that menu only. We can also provide the total distance of objects from first to last in any row or column. We also have an option of 'Associative' in our menu, which is ON while it is highlighted, and to of it, we can click on it. Another option mentioned there is 'Base Point.' There will be one object in which we will be able to see the base point. We can change the base point as we need. Finally, we have the 'Close array' option, which will get us out of this command. The 'Associative' option is used when we want to select every object at once, and when this option is kept off, only a single object will get selected from the whole array. The main benefit of this option is that we can delete single objects from the whole array. We can select the whole array together and can edit all objects at once. We can also replace object items with another object using the 'replace item' option from the upper menu. After replacing the object with another object, we can set the distance between every object using the 'Row spacing' or 'Column spacing' option.
See More

  • This tutorial will show you how to create a rectangular array in AutoCAD.
  • First, select the objects that you would like to make into an array.
  • Then, go to the Home tab and click on Array from the drop-down menu.
  • In the dialog box that appears, make sure that Rectangular is selected as your type of array.
  • Next, enter the number of rows and columns for your rectangular array. You can also specify whether or not you want to offset each row or column by entering a value in the Offset X (or Y) text box. Finally, click OK and your objects will be turned into an array!

  • The AutoCAD software is a CAD (computer aided design) program that is used to create architectural and engineering drawings.
  • It is a powerful tool that can be used to create complex designs and drawings with a few clicks of the mouse.
  • The AutoCAD software has been used by architects, engineers, and designers for over three decades.
  • AutoCAD’s array command can be used to draw multiple copies of one object or shape at different distances from each other.
  • This command can also be used to draw lines or objects with specific widths or heights at different distances from each other.

  • Osnap is a tool that Autocad provides to help users draw accurate and precise lines. It is used in Autocad to ensure accuracy when drawing lines, arcs, circles, and other objects.
  • Osnap can be accessed by pressing the "O" key on the keyboard. The cursor will then change into a crosshair that will allow you to move in any direction and create a point or line.
  • When you press the "O" key again, the cursor will return to its original state and you can continue drawing your object.
  • The Osnap menu also gives you access to other tools such as Ortho mode which allows users to draw objects with absolute precision (straight lines).

  • Osnap mode is more for taking screenshots of webpages, while Ortho mode is more for taking screenshots of the desktop. Osnap mode is a tool that is built into Windows 10. It allows you to take screenshots of webpages by pressing the "Print Screen" button on your keyboard and then pasting the screenshot into an image editing software like Photoshop or Paint.
  • Ortho mode is a tool that can be found in Windows 10's Snipping Tool. It allows you to take screenshots of desktop by pressing the "Print Screen" button on your keyboard and then pasting the screenshot into an image editing software like Photoshop or Paint.

  • Osnap is a content marketing platform that helps businesses and agencies to create, edit and publish branded content. The platform includes a suite of content creation tools such as text editor, video editor, image editor and photo editor.
  • Businesses and agencies can use Osnap to create custom content for their social media channels or email newsletters. It also provides a way to monitor the performance of the created content on social media channels.

A rectangular array in AutoCAD is a group of objects all in a row or column. A rectangular array can be used to create a series of lines, circles, or other shapes that are connected together.

An array is the process of creating a series of objects with a similar pattern or shape. There are two types of arrays in AutoCAD: linear and radial. Linear arrays are created by drawing lines that intersect to form a grid; while radial arrays are created by drawing circles that intersect to form a grid. In AutoCAD, it is not possible to create an elliptical array because it does not have the right number of intersecting lines or circles.

The array command in AutoCAD is used to construct a group of objects. It will create an array of the same object and you can specify the number of copies that are needed. You can also select which side to copy from - either the left, right, top or bottom. There are two ways to select objects for an array command: by using the Select Objects button or by dragging out a box around them on the screen.

A rectangular array command is used to create a number of objects in a row or column. It is one of the most powerful commands in AutoCAD because it can be used to create both rectangles and lines. The benefits of rectangular array command in AutoCAD are as follows: It is an easy way to draw a line or rectangle with multiple copies. It allows you to specify the spacing between each object, which makes it easier for you to control the size. It allows you to set the height and width of each copy separately, which means that you can make them different sizes without having to change anything else.

A rectangular array command is a CAD command that can be used to create a rectangular array of points or objects. A rectangular array command in AutoCAD contains the following components: First, the user specifies the number of rows and columns they want in the array. Next, they specify the distance between each row and column. Then, they enter a point on the drawing to mark where their first point will be located. The user can then enter an X and Y value for that point or select it from a list of existing points on their drawing. The final component is specifying whether this is an even or odd numbered row/column.

Creating a rectangular array in AutoCAD is quite simple. You need to create an object, select it and then use the Array command on the ribbon. Step 1: Create an object Step 2: Select the object and then click on "Array" on the ribbon. Step 3: Enter the number of rows and columns you want to make your rectangular array. Step 4: Enter a spacing value for your new array in inches or feet. Step 5: Click OK to generate your rectangular array.

Learner's Ratings

4.5

Overall Rating

  • 75%
  • 16%
  • 4%
  • 3%
  • 2%

Reviews

P
priyatam kumar
5

this website by excellent teacher by provide course.

N
Neetesh Kumar Ahirwar
5

good for freshers.

T
Tarun Maiti
5

very good couts

J
Jotino João
5

NOT SUGEST

S
surendra pal sharma
5

Good job

S
sharanu dhali
5

good explanation

H
Husnain Sabri
5

Help full so much

S
Subhash Kumar
5

very nice app for learning autocad

G
Gaurav Bhagwan Thombare
5

Nice

H
HEMANT SAWANT
5

nice

Show More
Recommended Courses
Course Content

  1. Introduction of AutoCAD
    4m 13s
  2. How to use LearnVern
    3m 20s
  3. How to change Workspace in AutoCAD
    4m 47s
  4. How to set units in drawing
    3m 3s
  5. How to use zoom and pan command
    4m 26s

  1. How to draw a line
    5m 32s
  2. How to draw line using co-ordinate system
    5m 59s
  3. How to draw rectangle
    5m 21s
  4. How to draw a circle
    8m 6s
  5. How to draw ellipse
    4m 59s
  6. How to draw polygon
    5m 7s
  7. How to draw arc
    9m 2s
  8. How to draw revision cloud
    4m 26s
  9. How to draw spline
    5m 25s
  10. How to draw polyline
    6m 43s
  11. How to draw construction line, ray and multiple points
    9m 38s

  1. How to select drawing and types of selection.
    4m 36s
  2. How to use move command
    4m 45s
  3. How to use copy command to copy any object
    4m 27s
  4. How to use stretch command
    3m 34s
  5. How to use scale command
    3m 54s
  6. How to use rotate command
    5m 2s
  7. How to use mirror command
    3m 28s
  8. How to use offset command
    6m 47s
  9. What is rectangular array and how to use it?
    9m 7s
  10. What is polar and What is path array and how to we can use it?
    9m 21s
  11. How to use fillet command
    5m 25s
  12. How to use chemfer command
    6m 18s
  13. How to use trim command
    6m 57s
  14. How to use extend command
    4m 49s
  15. How to use break, join, erase and oops, undo and redo commands
    8m 19s
  16. How to use solid, donut, fill and fill mode
    6m 30s
  17. How to use lengthen command
    5m 24s
  18. How to draw multiline and style
    10m 5s
  19. How to use divide and measure command
    5m 57s

  1. how to use function keys and ortho key.
    5m 15s
  2. How to use osnap function key
    14m 48s
  3. How to use grid and snap function keys.
    4m 53s
  4. How to use polar, otrack and dynamic input?
    8m

  1. How to use function key and isocircle.
    11m 2s

  1. Which are the different types of hutches and how to use it
    5m
  2. Which are the different types of boundry and other options of hatch
    6m 52s

  1. How to measure the object using inquiry command
    7m 20s
  2. How to creating dimension using dimension tools
    7m 47s
  3. How to modifying the dimension
    12m 33s
  4. How to create new dimension style and which are the options
    27m 22s
  5. How to work with multileader
    7m 45s

  1. How to create text using single line text and multiline text
    13m 2s
  2. How to create new text style and how to edit old text style
    4m 2s
  3. How to create table and which are the new table style
    8m 13s
  4. How to edit table and how to import table from excel
    4m 54s

  1. How to change object color, line type, and line type scale
    7m 23s
  2. How to create layers
    5m 53s
  3. How to use layer dropdown menu
    7m 29s
  4. How to import and export layer files using layer states manager
    4m 51s
  5. How to change line weight and how to use match property
    6m 10s
  6. How to hide and isolate objects
    2m 36s

  1. How to copy, cut, and paste object
    3m 5s
  2. How to paste object with same coordinate? what is use of paste special and how to use paste special and paste as a block
    7m 1s

  1. How to create group and use of group command
    7m
  2. How to create block using block command
    5m 20s
  3. How to use block using insert block command
    7m 42s
  4. How to create own library in autoCAD using write block
    5m 2s
  5. How to use attribute definition
    3m 32s
  6. How to defining a block with attributes
    6m 48s

  1. How to attatch any file in the drawing using xref command
    4m 48s
  2. How to use attaching and overlaying xref
    4m 38s
  3. How to remove xref file in the drawing
    7m 4s

  1. How to Design Center and Tool Paletts
    11m 53s

  1. How to create layout
    7m 55s

  1. How to create title block using attribute block and template
    15m 42s
  2. How to use etrasmit
    4m 10s
  3. How to ploting drawing & conversion to pdf,jpg,png & other format
    5m 53s

  1. Exercise of Array
    33s
  2. Exercise Of Assambly
    33s
  3. Exercise Of Circle,Line,Trim
    38s
  4. Exercise Of Fillet Circle Polygon
    21s
  5. Exercise Of Isomatric Drawing
    33s

  1. Isometric Project
    16m 28s
  2. Mechanical Project
    8m 25s

  1. How to change Workspace and Visual Style for 3D
    4m 24s

  1. How to Create Box Cylinder and Cone
    14m 52s
  2. How to Create Sphere Pyramid Wedge and Torus
    10m 42s

  1. How To Use Extrude Command
    5m 15s
  2. How To Use Revolve Command
    4m 55s
  3. How To Use Sweep Command
    6m 25s
  4. How To Use Loft Command
    2m 47s
  5. How To Use Presspull Command
    3m 7s
  6. How to Create Wall with Poly solid, Extrude and Press pull
    9m 10s

  1. How to Use Boolean Operation
    7m 58s

  1. How To Use Ucs and Dynamic Ucs Command
    13m 10s

  1. How To Use 3D Orbit Command?
    2m 58s
  2. How To Use 3D Array Command
    4m 58s
  3. How To Use 3D Rotate Command
    6m 6s
  4. How To Use 3D Move Command
    1m 53s
  5. How To Use 3D Mirror Command
    6m 15s
  6. How To Use Align And 3D Align Command
    4m 40s

  1. How To Use Slice Command
    7m 30s
  2. How To Use Imprint and Solid Edit Command
    5m 28s
  3. How To Use Taper Face, Extrude Face and Offset face
    5m 27s
  4. How To Use Shell Command
    2m 49s
  5. How To Use Fillet Edge and Chamfer Command
    5m 42s
  6. How To Use Extract and Offset Edges Command
    4m 45s
  7. How To Use Interfere Command
    3m 4s

  1. How To Use Section
    6m 30s

  1. How To Use Planar and network Command
    3m 30s
  2. How To Use Extrude Command in 3D
    2m 53s
  3. How To Use Revolve Command in 3D
    2m 49s
  4. How To Use Sweep and Loft Command
    4m 8s
  5. How To Use Blend, Patch, Offset and extend commands
    8m 40s
  6. How To Use Trim, Untrim and fillet Commands
    2m 52s

  1. How To Material Applying Editing
    11m 43s
  2. How To Applying Lighting And Rendering
    11m 14s

  1. AutoCAD 3D Exercise
    2m 43s

  1. AutoCAD 3D Project-1
    13m 3s
  2. AutoCAD 3D Project-2
    12m 30s
Enroll For Free