AutoCAD Mechanical in English > Solid Modify with 3D

Using 3D Mirror Command

19.4k
Overview
The 3d mirror command in AutoCAD is used to create a mirrored image of one object on another object. This type of mirroring is used for many purposes, such as creating a symmetrical pattern with two objects or creating a reflection for an object. This command can be found in the following locations: Command prompt Ribbon Menu bar The 3d mirror command in AutoCAD also allows you to create a mirrored copy of an existing object. It is useful when you need to make a copy of an object and then mirror it. This can be done by selecting the object and then using the Mirror command on the Home tab. The benefits of using a AutoCAD 3d mirror command: The AutoCAD 3d mirror command is a 3D modeling tool that can be used to create symmetrical copies of objects in the same plane. The benefits of using the AutoCAD 3d mirror command include: It can be used to create symmetrical copies of objects in the same plane. It can be used to make multiple identical parts, such as mirrors and door frames. It can also be used to make large quantities of identical or similar parts, such as car doors. What is the significance of 3d mirror command in AutoCAD? The 3D mirror command in AutoCAD allows users to view the image of a drawing in a mirror image. This is especially helpful for people who are not left-handed or have limited space on their desk. The 3D mirror command in AutoCAD is used by many CAD users because it saves them from having to use a lot of space on their desk and it can be done with just one click. It is also important for designers to use this tool because they can see how the design will look in different angles and get feedback before finishing the design. What tools do you need to use 3d mirror command in AutoCAD? 3d mirror command in Autocad is a tool that creates a 3D view of the current view in Autocad. It is used to create a 3D model of an object. This tool can be used by both beginners and professional users. But it is important to note that this tool will only work if you are using Autocad 2017 or later. How to mirror isometric drawing in AutoCAD? There are many ways to mirror an isometric drawing. Perpendicular lines can be drawn in the same direction and then mirrored to get the desired result. There are also some tools that can help you with this process like the Mirror command in AutoCAD. This command will create a mirror image of your drawing on the opposite side, without changing its size or rotation angle. What is the AutoCAD command to draw half an object and duplicate the other half? To draw a half of an object in AutoCAD, you need to use the Line command. The Line command can be used to create lines, arcs, polylines and more. To duplicate the other half of an object in AutoCAD, you need to use the Polyline command. What is the difference between a 3D mirror image and a 2D mirror image in AutoCAD? 3D mirror image is a mirror image of the object in a 3D coordinate system. It is also known as a planar reflection. 2D mirror image is the reflection of an object in a 2D coordinate system. The difference between these two types of images can be found when you look at them from different angles: A 3D mirror image will appear to be a 2D mirror image if you are looking at it from the same angle as it was created, and vice versa.
See More

In AutoCAD, the mirror command is used to make a duplicate (mirror copy) of the specified object. After mirroring the item, we can also delete the original object. Objects that represent half of an object can be reflected over a central line to produce the other half.

3D Mirror Command is a feature in the 3DS Max. It is available in four modes:

Standard: It is used to create a mirror image of the model.

  • XYZ: It is used to create a mirror image of the model on an X-Y plane.
  • XYZ with Axis Constraint: It is used to create a mirror image of the model on an X-Y plane with axis constraint.
  • XYZ with Axis Constraint and Point Constraint: It is used to create a mirror image of the model on an X-Y plane with axis constraint and point constraint.

Mirroring objects in AutoCAD can be done with the help of 3D Mirror Command. This command can be used to create symmetrical drawings, like the one below.

The 3D Mirror Command can be accessed from the Modify tab of the Ribbon, by clicking on the 3D Objects button and selecting the Mirror tool. The command can also be accessed from the Home tab by clicking on the Modify panel and then selecting the 3D Objects button and finally choosing Mirror.

The purpose of a 3D mirror is to make people feel more comfortable with their appearance. It also makes it easier for them to get ready in the morning because they can see themselves from every angle.

3D mirrors are becoming popular among designers and architects. They are used to create a more realistic image of what they want to see in their designs. The benefits of using a 3d mirror AutoCAD include the ability to visualize the design before it is built, use it for multiple projects, and save time on construction. A 3d mirror AutoCAD is an alternative to traditional drawing tools such as pencils, markers, and paint brushes.

AutoCAD is a 3D modelling software which has been around since the early 1980s. It is used by many architects, engineers, and designers to create drawings and models of buildings. The difference between a regular AutoCAD and a 3d mirror AutoCAD is that the latter uses an additional layer of glass to reflect the image instead of using a monitor. This makes it significantly easier to view drawings in real-time as they are being created. The use cases for this type of software include architectural design, engineering design, product design, interior design, and even gaming development.

The 3d mirror AutoCAD is a tool that allows the user to project a design or drawing onto a flat surface. This helps in creating 3D objects with accuracy and quality. The 3d mirror AutoCAD has many uses, but it is mostly used for architecture, engineering and manufacturing. The software works by projecting the design on to the surface, then using the computer's graphics card to render it in three dimensions. It also works by projecting an image of the designed object onto another surface and then using that as a reference point for cutting out of cardboard or plastic sheeting.

Learner's Ratings

4.4

Overall Rating

  • 75%
  • 12%
  • 5%
  • 3%
  • 5%

Reviews

P
Prabhat Yadav
5

Superb and amazing 😍🤩 enjoyable experience.

S
sumith gunaratne
5

This course help me to improve my knowledge. The lecturer conducts the lessons fairly well, i admire him.

A
angel irphan
5

good

A
angel irphan
5

it was good experience .

A
Abhishek Singh
5

Good and Knowledgeable Course with perspective of mechanical engineering basically in designing engineering with basic software AutoCAD

M
Marmik Satani
5

Very nice

A
Ankit PATEL
5

Good

R
RAJ KISHAN
5

VERY HELPFUL COURSE FOR MECHANICAL ENGINEERING

S
shubham chougule
5

Course is good 👌👌

D
Dharmendra Kumar
5

Autocad

Show More
Recommended Courses
Course Content

  1. Introduction to Autocad
    1m 17s
  2. How to use LearnVern
    3m 8s
  3. Change Workspace
    4m 42s
  4. Set Units in Drawing
    3m 9s
  5. Using Zoom & Pan
    4m 29s

  1. Draw a Line
    5m 50s
  2. Draw a Line using Coordinate System
    8m 54s
  3. Draw a Rectangle
    5m 26s
  4. Draw a Circle
    8m 27s
  5. Draw an Ellipse
    4m 56s
  6. Draw a Polygon
    5m 14s
  7. Draw an Arc
    9m 5s
  8. Draw Revision Cloud
    4m 32s
  9. Draw a Spline
    5m 24s
  10. Draw Polyline
    6m 27s
  11. Draw Construction Lines, Rays & Multiple Points
    8m 31s

  1. Select Drawing And Types Of Selection
    5m 20s
  2. Using Move Command
    4m 49s
  3. Using Copy Command to Copy any Object
    4m 29s
  4. Using Stretch Command
    4m 31s
  5. Using Scale Command
    4m 6s
  6. Using Rotate Command
    5m 43s
  7. Using Mirror Command
    3m 53s
  8. Using Offset Command
    7m 16s
  9. Rectangular Array
    9m 22s
  10. Polar & Path Array
    10m 15s
  11. Using Fillet Command
    6m 2s
  12. Using Chamfer Command
    5m 51s
  13. Using Trim Command
    7m 20s
  14. Using Extend Command
    6m 1s
  15. Break, Join, Erase, Oops, Undo & Redo.
    10m 5s
  16. Using Solid, Donut, Fill & Fill Mode Command
    6m 40s
  17. Using Lengthen Command
    6m 27s
  18. Using Multiline & Style
    10m 12s
  19. Using Divide & Measure Command
    7m 3s

  1. Using Function & Ortho Key
    5m 22s
  2. Using Osnap Function
    16m 45s
  3. Using Grid & Snap Command
    3m 37s
  4. Using Polar, Otrack & Dynamic Input
    8m 38s

  1. Draw Isometric Drawing
    13m 13s

  1. Hatches
    5m 24s
  2. Different Boundaries & Types Of Hatches
    8m 49s

  1. Measure Object using Inquiry Command
    9m 14s
  2. Creating Dimensions using Dimension Tools
    8m 20s
  3. Modify Dimensions
    12m 59s
  4. Dimension Styles
    29m 4s
  5. Multileader & Multileader Styles
    7m 25s

  1. Creating Text Using Single & Multiline Text
    15m 5s
  2. Creating New Text Style And Edit An Old One
    4m 31s
  3. Creating Table & New Table Style
    9m 18s
  4. Edit & Import a Table From Excel
    5m 7s

  1. Changing Object Colour, Linetype & Linetype Scale
    8m 55s
  2. Creating Layers
    6m 46s
  3. Using Layer Drop Down Menu
    7m 56s
  4. Importing & Exporting Layer Files Using Layer States Manager
    4m 40s
  5. Changing Lineweight & Using Match & Property
    6m 33s
  6. Hiding & Isolating Objects
    3m 8s

  1. Copy, Cut And Paste Object
    3m 34s
  2. Paste Special
    8m 26s

  1. Creating a Group & Its Use
    6m 50s
  2. Creating Block Command And Its Use
    5m 17s
  3. Insert Block Command
    8m 34s
  4. Creating Library in Autocad using Write Block
    5m 32s
  5. Using Attribute Definition
    4m 4s
  6. Define a Block With Attributes
    7m 14s

  1. Using Xref Command
    4m 40s
  2. Using Attaching And Overlaying Xref
    4m 50s
  3. Remove Xref File in Drawing
    6m 36s

  1. Design Centre And Tool Palettes
    13m 8s

  1. Creating a Layout
    8m 34s

  1. Creating a Title Block
    16m 57s
  2. Using Etransmit
    4m 28s
  3. Plotting Options
    6m 31s

  1. Exercise Of Array
    40s
  2. Exercise Of Assembly
    48s
  3. Exercise Of Circle, Line & Trim
    43s
  4. Exercise Of Fillet, Circle, Polygon
    35s
  5. Exercise Of Isometric Drawing
    49s

  1. Isometric Project
    17m 18s
  2. Mechanical Project
    9m 31s

  1. Changing Workspace and Visual 3D Style
    5m 22s

  1. Create Box Cylinder And Cone
    16m 53s
  2. Create Sphere, Pyramid, Wedge & Torus
    12m 4s

  1. Using Extrude Command
    6m 23s
  2. Using Revolve Command
    5m 25s
  3. Using Sweep Command
    6m 48s
  4. Using Loft Command
    3m 24s
  5. Using Presspull Command
    3m 32s
  6. Create a Wall With Polysolid, Extrude & Presspull
    9m 28s

  1. Using Boolean Operation
    8m

  1. Using Ucs And Dynamic Ucs Command?
    13m

  1. Using 3D Orbit Command
    3m 11s
  2. Using 3D Array Command
    5m 39s
  3. Using 3D Rotate Command
    6m 3s
  4. Using 3D Move Command
    2m 9s
  5. Using 3D Mirror Command
    6m 8s
  6. Using Align And 3D Align Command
    5m 16s

  1. Using Slice Command
    8m 19s
  2. Using Imprint And Solid Edit Command
    5m 47s
  3. Using Tapper Face, Extrude Face and Offset Face
    6m 36s
  4. Using Shell Command.
    3m 9s
  5. Using Fillet Edge & Chamfer Command.
    6m 55s
  6. Using Extract And Offset Edges Command
    5m 1s
  7. Interfere Command
    3m 57s

  1. Using Section
    7m 34s

  1. Using Planar & Network Command
    3m 49s
  2. Using the Extrude Command
    3m 40s
  3. Using the Revolve Command
    3m 24s
  4. Using Sweep & Loft Command
    4m 58s
  5. Using Blend, Patch, Offset and Extend Commands
    8m 59s
  6. Using The Trim, Untrim & Fillet Command
    3m 25s

  1. Apply Material & Edit It
    11m 29s
  2. Apply Lighting and Rendering
    11m 31s

  1. Autocad 3D Exercise
    3m 18s

  1. Autocad 3D Project - 1
    13m 28s
  2. Autocad 3D Project - 2
    12m 27s

  1. Course Summary
    2m 25s

  1. Career Guideline
    1m 28s
Enroll For Free