Python Control of 162 LCD Modules After you've experimented with LEDs, switches, and stepper motors, 162 alphanumeric LCD modules are a natural next step. These modules are inexpensive (around $10) and simple to connect to the Raspberry Pi. They contain 16 connections, but only 6 GPIO pins on your Pi are required.
Connect the screen's GND to any GND on the Pico (Black wire).
Connect VDD/VCC to the Pico's VBUS (Red wire)
SDA should be connected to I2C0 SDA (GP0, Physical pin 1, Orange wire).
SCK / SCL should be connected to I2C0 SCL (GP1, Physical pin 2, Yellow wire).
Learner's Ratings
5
Overall Rating
100%
0%
0%
0%
0%
Reviews
H
Hardik Patel
5
I just learnt this course and many of my concepts are clear now about Raspberry Pi
P
Prabhat Yadav
5
Superb and amazing 😍🤩 enjoyable experience.
R
RAVAN RATHORE
5
good
H
Hemant Ramphul
5
Wow.. Thank you very much.. your explanation is so easy to understand, simple and straight forward.
R
Roshan Channe
5
you are the best...!!!
R
Rahul Singh
5
I like this course
A
Akash Rawat
5
Thank you for amazing lectures and discussions! I learned a lot and benefited from your course!
Thank you!
L
Lambodar Waghmare
5
hello.. first of all thank you so much to learn vern ... im robotics engineering student ... i was learn complete IOT ARDUINO from learnvern and made a lots of project ... now thanks for rasbp tutori
Share a personalized message with your friends.