Autodesk Inventor 2022 - Complete Course > Sheet Metal Module

Bend and Fold Features

21k
Overview

In this tutorial, we will learn about Inventor’s bend and fold features.

Inventor is a 3D design software for creating and designing product models. The bend feature in Autodesk Inventor allows designers to create freeform shapes that are not limited to a flat surface.

3D modeling has been around for decades. But it was only until recently that the technology became accessible enough to be used by the masses. With Autodesk Inventor, designers can create 3D models of their products and then get them printed out in the real world. This is possible because of the bend feature which allows designers to create freeform shapes that are not limited to a flat surface.

The inventor bend feature is an easy way to create complex shapes in Autodesk Inventor. It can be used to create 3D objects with a variety of shapes and sizes. It is an easy way to create complex shapes in Autodesk Inventor. It can be used to create 3D objects with a variety of shapes and sizes.  To create a curve using the bend feature, click Edit & Shape & Bends. Next, select the first and last vertices of the line of bends that you want to make (the two ends of your shape), then press Enter. The bend feature places a new vertex in-between each selected vertex. The third vertex is automatically created and placed as  the center of the bend.

The Autodesk Inventor fold feature is another powerful tool that can help you design parts and assemblies in a more efficient way. It is designed to reduce the number of steps required to create and edit parts. It is a very vital and primary feature that this software offers to its users. It helps you design complex assemblies by reducing the number of steps required to create and edit parts.


See More

Autodesk Inventor's Bend part is a 3D modeling tool which is used to create, modify and analyze complex shapes.

This tool allows users to create a bend in the shape of the model by pulling out or pushing in the edges. This is done by selecting two points on the edge and then dragging them apart or together. The amount of bend can be adjusted by dragging one point while holding down the Shift key.

The Autodesk Inventor's Bend part can help with many tasks, such as:

- Creating an organic shape from a hard edge

- Creating a tube from an open edge

- Creating a closed form from an open form 

- Creating a sharp edge with an undetermined opening

The Autodesk Inventor's Bend part can help create some organic shapes by creating a bend in an open edge. This can be done by first selecting the open edge and then clicking on the Bend icon above the Open Edge tab.

The Autodesk Inventor bend tool is an easy-to-use and intuitive tool. It is a powerful CAD software which can help you design and create 3D models of any shape or size.

The Autodesk Inventor bend tool has many benefits for designers, engineers, and architects. It helps them create 3D models of anything they want without the need for expensive software or expertise in 3D modeling.

Autodesk Inventor fold is a feature that allows you to fold the view in 3D space.

Autodesk Inventor fold can be used to create a cutaway view, or it can be used to hide unwanted components on the screen, such as those that are behind other components.

If you want to see how folding works in Autodesk Inventor, follow these steps:

1) Select the "Fold" command from the "View" menu.

2) A dialog box will open and allow you to select which faces should be folded and which should not.

3) Once you have made your selections, click "OK".

Autodesk Inventor fold tool is an automated tool that helps designers and engineers to create folded or unfolded parts by just dragging a few points. The program can also be used for generating 3D models of the finished product.

The benefits of using Autodesk Inventor fold tool are that it saves time and reduces errors, which in turn leads to better quality products.

The Autodesk Inventor fold tool is an easy and intuitive way to design and simulate your product. It has many applications, like:

- To create a flat pattern that can be cut out of paper or cardboard.

- To create a 3D model to be used with 3D printing software.

- To create a 2D drawing that can be sent to laser cutting services.

- To show the folding process on a 3D model with animation.

- To find the best folding sequence for your product.

Designing with folded components is a lot more complicated than designing with flat components in AutoCAD. This is because the folded design has to be done in 3D space, and the software has to do all the calculations for you.

When designing with flat components in AutoCAD, you just need to know how big each component needs to be, and then use a 2D drawing. The calculations will be completed entirely by the software.

Autodesk Inventor is a software that allows engineers, designers and students to design, visualize and document 3D designs. Bend features are the shortcuts in Autodesk Inventor that allow engineers to quickly create complex shapes without having to go through the long modeling process with the sketching tools.

The Fold Feature in Autodesk Inventor allows for the generation of new parts by folding other existing parts. It is a powerful tool that can be used to create complex shapes and designs within hours.

Fold features are helpful in Autodesk Inventor. Fold features allow the user to get 3D aspects of a 2D drawing and with these, they can create innovative new products without having to use traditional manufacturing techniques.

Inventor is a 3D modeling tool that provides users with the ability to create new parts and components for their designs. With the help of features like Bend and Move, Inventor allows users to create more complex shapes and designs by leveraging features like bezier curves, revolve, sweep and loft.

Autodesk Inventor has bend and fold features which let designers create complex shapes from flat sheets. This can be done by creating a basic sketch, then using the bend and fold tools to add additional details. Once all the finishing touches are added, designers can send the file to the fabrication department for manufacturing.

Learner's Ratings

4.6

Overall Rating

  • 77%
  • 11%
  • 6%
  • 3%
  • 3%

Reviews

S
SYED USAMA ALI
5

Useful

A
Aleksander Arkaev
5

Thx for your job, Mr.Bhavsar!

D
Dharmesh Patel
5

Learning experience is superb, i recommend to every beginner inventor learner should join the class, Mr Bhavsar explaining all the detailing is very simple and easy to understand

A
Ahmad Ullah
5

Thank You Sir. Its's really helpful for me

S
Suraj Kumar Prasad
5

sir how can i get resources

K
KOVVURU DIVYA
5

Good Explanation and usefull

D
Dangi Amikant
5

GOOD EFFORT THANK YOU.

M
mounesh
5

THANK YOU SO MUCH, SIR

S
Subin Ks
5

awesome

B
Bahador Pourhosseini
5

thank you

Show More
Recommended Courses
Course Content

  1. Introduction to Autodesk Inventor
    6m 34s
  2. Installation of Autodesk Inventor Professional 2021
    4m 17s
  3. What is CAD
    10m 26s
  4. User Interface of Autodesk Inventor
    11m 39s
  5. Unit Selection
    5m 49s
  6. Inventor Project Files
    11m 34s

  1. How to Active Sketcher Module
    2m 13s
  2. Working Plane and Axis
    9m 34s
  3. Creating Lines
    12m 50s
  4. Creating Circles and Arcs
    12m 22s
  5. Creating Rectangles and Polygon
    10m 31s
  6. Creating Splines and Ellipses
    10m 39s
  7. Creating Slots
    9m 55s
  8. Creating Fillets and Chamfers
    5m 57s
  9. Sketch Features and Editing Tools
    20m 29s
  10. Creating Sketch Patterns
    6m 22s

  1. Creating Geometric Constraints
    18m 38s
  2. Creating Dimensional Constraints
    9m 28s
  3. Sketch Practice 1
    9m 46s
  4. Sketch Practice 2
    13m 36s
  5. Assignment of Sketch Constraints and Dimensions
    4m 4s

  1. Extrude Feature
    16m 24s
  2. Revolve Feature
    13m 55s
  3. Sweep Feature
    10m 30s
  4. Loft Feature
    14m 22s
  5. Coil Feature
    10m 2s
  6. Emboss Feature
    9m 19s
  7. Hole Wizard
    10m 31s
  8. Fillet and Chamfer
    11m 40s
  9. Rib and Draft
    15m 10s
  10. Shell and Thread
    7m 47s
  11. Combine and Thicken
    8m 4s
  12. Split, Direct, Delete Face
    12m 17s
  13. Patterns
    15m 58s
  14. Decal, Import and Unwrap
    13m 42s
  15. Work Features
    18m 29s
  16. Applying Appearances
    10m 6s
  17. Connecting Rod Exercise
    19m 50s
  18. Knuckle Joint Exercise Part - 1
    20m 5s
  19. Knuckle Joint Exercise Part - 2
    17m 32s
  20. Assignment of Part Modeling
    7m 19s

  1. Knuckle Joint Assembly with Angular Constraints and Symmetry Constraints
    31m 10s
  2. Motion Constraints
    18m 39s
  3. Transitional Constraints
    7m 6s
  4. Constraint Set
    8m 7s
  5. Place Joints
    22m 13s
  6. How To Create Bill of Material
    8m 49s
  7. How to Copy Assembly
    9m 32s
  8. Assembly Patterns
    9m 24s
  9. Assembly Mirror
    5m 40s
  10. Create New Components in Assembly Environment
    13m 58s
  11. Content Center
    8m 59s
  12. Exploded View Presentation
    5m 53s
  13. Animations
    8m 16s
  14. Practice :1 - Crane Hook Assembly
    20m 50s
  15. Assignment of Assembly
    6m 44s

  1. Introduction to Sheet Metal Rules
    17m 38s
  2. Working with Flange Tools
    12m 57s
  3. Working with Contour and Lofted Flange, Contour Roll, Hem Tools
    21m 25s
  4. Bend and Fold Features
    7m 1s
  5. Unfold and Refold Features
    6m 25s
  6. Cut, Corner, Radius and Chamfer Features
    8m 31s
  7. Corner Seam
    8m 50s
  8. Punch Tool
    10m 3s
  9. LCD Mount Exercise Part - 1
    21m 34s
  10. LCD Mount Exercise Part - 2
    12m 50s
  11. LCD Mount Exercise Part - 3
    22m 45s
  12. LCD Mount Exercise Part - 4
    17m 46s
  13. Assignment of Sheet Metal Module
    4m 34s

  1. Creating a New Drawing
    9m 41s
  2. Base and Projected Views
    4m 41s
  3. Additional Views
    13m 2s
  4. Manipulating Views
    10m 2s
  5. Drawing Annotations
    15m 23s
  6. Revision Tag, Surface Finish and Welding Details in Drawing sheet
    16m 8s
  7. How to Add Bill of Material in Drawing Sheet
    12m 15s
  8. Annotation of Sheet Metal in Drawing Sheet
    8m 39s
  9. Drafting of Fork Eye End Exercise
    16m 37s
  10. Drafting of Eye End Exercise
    8m 35s
  11. Drafting of Knuckle Pin,Collar and Taper Pin Exercise
    17m 5s
  12. Drafting of Knuckle Joint Assembly Exercise
    11m 55s
  13. Assignment of Drawing Module
    3m 22s

  1. Inventor Studio
    25m 27s
  2. Assignment of Inventor Studio
    2m 30s

  1. Swivel Plate
    14m 36s
  2. Screw Bar
  3. Back Plate
    19m 6s
  4. Pivot Pin and Swivel Screw Pin
    8m 15s
  5. Clamping Screw ,Tool Fixing Screw & Spacer Bush
    13m 8s
  6. Handle
    6m 2s
  7. Vertical Slide
    17m 37s
  8. Handle Bar
    8m 32s
  9. Washer and Small Washer
    1m 45s
  10. Tool Holder
    6m 4s
  11. Drag Plate
    6m 33s
  12. Assembly of Shaper Tool Head
    21m 30s
  13. Exploded View of Shaper Tool Head
    10m 43s
  14. Drafting of Back Plate
    15m 29s
  15. Drafting of Clamping Screw, Tool Fixing Screw, Washers and Bush
    17m 55s
  16. Drafting of Swivel Plate
    8m 6s
  17. Drafting of Drag Plate
    4m 53s
  18. Drafting of Handle Bar and Screw Bar
    9m 53s
  19. Drafting of Handle, Pivot Pin, Swivel Screw Pin
    9m 53s
  20. Drafting of Vertical Slide
    7m 30s
  21. Drafting of Tool Holder
    6m 51s

  1. Course Summary
    3m 26s

  1. Interview Questions
    8m 2s

  1. Career Guideline
    2m 13s
Enroll For Free